SR EN RU

UNIVERSAL SOLUTION

6004 2S

Ball bearing

Application: Universal Solution

3D view

Technical Specification
dBore diameter20mm
DOutside diameter 42mm
C Width outer ring 12mm
d1Outer diameter inner ring 27.2mm
kgMass0.07kg
CdynDynamic load rating9.36kN
CoStatic load rating5kN
PuFatigue load limit0.21kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

6004 2S

×

6004 2S

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

6004 2S

×