SR EN RU

LY 208-108 2F.SH

Ball Bearing

Application: Harvester

3D view

Technical Specification
dBore diameter38.1mm
DOutside diameter 80mm
BWidth inner ring 42.8mm
C Width outer ring 21mm
sDistance from inner ring side face to raceway centre 21.4mm
d1Outer diameter inner ring 56.6mm
GsSet screw 3/8-24 UNFinch
swHexagonal key size for set screw 4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1.5mm
B1Width inner ring with locking collar56.3mm
d2Locking collar outside diameter63.6mm
B2Width locking collar18.3mm
kgMass0.8kg
CdynDynamic load rating30.7kN
CoStatic load rating19kN
PuFatigue load limit0.798kN

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LY 208-108 2F.SH

×

LY 208-108 2F.SH

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LY 208-108 2F.SH

×