SR EN RU

Y BEARING UNITS

UYG 210 2S

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

3D view

Technical Specification
dBore diameter50mm
DaCentering diameter110mm
LOverall width165mm
ADistance from the housing flange to the front of the inner ring of the bearing42.7mm
A1Total housing width40mm
A2Housing flange thickness14mm
A3Centering diameter height12mm
JPitch circle diameter138mm
J1Distance between the holes97.6mm
NDiameter of attachment slot 16mm
kgMass2.92kg
CdynDynamic load rating35.1kN
CoStatic load rating23.2kN
PuFatigue load limit0.98kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

UYG 210 2S

×

UYG 210 2S

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

UYG 210 2S

×