SR EN RU

Y BEARING UNITS

UYG 209 2S

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

3D view

Technical Specification
dBore diameter45mm
DaCentering diameter105mm
LOverall width160mm
ADistance from the housing flange to the front of the inner ring of the bearing42.7mm
A1Total housing width38mm
A2Housing flange thickness14mm
A3Centering diameter height12mm
JPitch circle diameter132mm
J1Distance between the holes93.3mm
NDiameter of attachment slot 16mm
kgMass2.64kg
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.915kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

UYG 209 2S

×

UYG 209 2S

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

UYG 209 2S

×