SR EN RU

Y BEARING UNITS

UYG 207 2S

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

3D view

Technical Specification
dBore diameter35mm
DaCentering diameter90mm
LOverall width135mm
ADistance from the housing flange to the front of the inner ring of the bearing40.4mm
A1Total housing width34mm
A2Housing flange thickness9mm
A3Centering diameter height8mm
JPitch circle diameter110mm
J1Distance between the holes77.8mm
NDiameter of attachment slot 14mm
kgMass1.69kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

UYG 207 2S

×

UYG 207 2S

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

UYG 207 2S

×