SR EN RU

Y BEARING UNITS

UEG 206 2S

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

3D view

Technical Specification
dBore diameter30mm
DaCentering diameter80mm
LOverall width125mm
ADistance from the housing flange to the front of the inner ring of the bearing31mm
A1Total housing width31mm
A2Housing flange thickness8mm
A3Centering diameter height8mm
JPitch circle diameter100mm
J1Distance between the holes70.7mm
NDiameter of attachment slot 12mm
kgMass1.34kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

UEG 206 2S

×

UEG 206 2S

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

UEG 206 2S

×