SR EN RU

Y BEARING UNITS

UEG 204 2S

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

3D view

Technical Specification
dBore diameter20mm
DaCentering diameter62mm
LOverall width100mm
ADistance from the housing flange to the front of the inner ring of the bearing28.3mm
A1Total housing width25.5mm
A2Housing flange thickness7mm
A3Centering diameter height5mm
JPitch circle diameter78mm
J1Distance between the holes55.1mm
NDiameter of attachment slot 12mm
kgMass0.65kg
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.28kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

UEG 204 2S

×

UEG 204 2S

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

UEG 204 2S

×