Y BEARING UNITS

LEF 216 2F

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

3D view

Technical Specification
d	Bore diameter	80	mm
L	Overall width	208	mm
A	Distance from the housing flange to the front of the inner ring of the bearing	81.6	mm
A1	Total housing width	54.5	mm
A2	Housing flange thickness	22	mm
J	Pitch circle diameter	165	mm
N	Diameter of attachment slot	23	mm
kg	Mass	7.5	kg
Cdyn	Dynamic load rating	72.8	kN
Co	Static load rating	53	kN
Pu	Fatigue load limit	2.16	kN

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing