Y BEARING UNITS

LYF 215 2S

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

3D view

Technical Specification
d	Bore diameter	75	mm
L	Overall width	200	mm
A	Distance from the housing flange to the front of the inner ring of the bearing	88.8	mm
A1	Total housing width	53.6	mm
A2	Housing flange thickness	22.1	mm
J	Pitch circle diameter	159	mm
N	Diameter of attachment slot	19	mm
kg	Mass	7.6	kg
Cdyn	Dynamic load rating	66.3	kN
Co	Static load rating	49	kN
Pu	Fatigue load limit	2.04	kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing