SR EN RU

Y BEARING UNITS

UEF 209 2S

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

3D view

Technical Specification
dBore diameter45mm
LOverall width137mm
ADistance from the housing flange to the front of the inner ring of the bearing47.8mm
A1Total housing width38mm
A2Housing flange thickness16mm
JPitch circle diameter105mm
NDiameter of attachment slot 16mm
kgMass2.08kg
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.915kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

UEF 209 2S

×

UEF 209 2S

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

UEF 209 2S

×