SR EN RU

Y BEARING UNITS

LYF 206 2F

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

3D view

Technical Specification
dBore diameter30mm
LOverall width108mm
ADistance from the housing flange to the front of the inner ring of the bearing48.1mm
A1Total housing width31mm
A2Housing flange thickness13mm
JPitch circle diameter83mm
NDiameter of attachment slot 12mm
kgMass1.07kg
CdynDynamic load rating19.5kN
CoStatic load rating11.2kN
PuFatigue load limit0.475kN

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LYF 206 2F

×

LYF 206 2F

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LYF 206 2F

×