Y BEARING UNITS

LSU 209 2F

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "U"

3D view

Technical Specification
d	Bore diameter	45	mm
L	Overall length	120	mm
A	Housing contact surface width	48	mm
A1	Width of the top of the housing	32	mm
H	Housing height	106.5	mm
H1	Distance from the contact surface to the bearing axis	54	mm
J	Pitch circle diameter	95.3	mm
G	Thread	M16	mm
G1	Thread length	22	mm
s1	Distance from locking device side face to raceway centre	17.5	mm
kg	Mass	1.82	kg
Cdyn	Dynamic load rating	33.2	kN
Co	Static load rating	21.6	kN
Pu	Fatigue load limit	0.915	kN

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing