SR EN RU

Y BEARINGS

LS 209 2F

Y-Ball Bearings With Extended Standard Inner Ring

3D view

Technical Specification
dBore diameter45mm
DOutside diameter 85mm
BWidth inner ring 35mm
C Width outer ring 22mm
d1Outer diameter inner ring 56.6mm
EDistance from raceway centre to the hole for lubrication 6.1mm
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.915kN
kgMass0.53kg

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LS 209 2F

×

LS 209 2F

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LS 209 2F

×