SR EN RU

Y BEARINGS

UY 207-106 2S.H

Y-Ball Bearings With Eccentric Locking Collar

3D view

Technical Specification
dBore diameter34.925mm
DOutside diameter 72mm
BWidth inner ring 25.4mm
C Width outer ring 19mm
sDistance from inner ring side face to raceway centre 9.5mm
d1Outer diameter inner ring 46.1mm
GsSet screw 3/8-24 UNFmm
swHexagonal key size for set screw 4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1mm
B1Width inner ring with locking collar38.9mm
d2Locking collar outside diameter51.2mm
B2Width locking collar17.5mm
kgMass0.45kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.66kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

UY 207-106 2S.H

×

UY 207-106 2S.H

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

UY 207-106 2S.H

×