Y BEARING UNITS

UYN 205 2S

Y-Bearing Flanged Units With Oval Grey Cast Iron Housing "N"

3D view

Technical Specification
d	Bore diameter	25	mm
L	Overall width	68	mm
A	Distance from the housing flange to the front of the inner ring of the bearing	39.5	mm
A1	Total housing width	27	mm
A2	Housing flange thickness	14	mm
H	Housing height	130	mm
J	Pitch circle diameter	99	mm
N	Diameter of attachment slot	16	mm
kg	Mass	0.61	kg
Cdyn	Dynamic load rating	14	kN
Co	Static load rating	7.8	kN
Pu	Fatigue load limit	0.335	kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing