SR EN RU

UNIVERSAL SOLUTION

LR-35/72

Ball Bearing

Application: Packer Baler

3D view

Technical Specification
DOutside diameter 72mm
dBore diameter35mm
BWidth inner ring 17mm
kgMass0.32kg
CdynDynamic load rating16kN
CoStatic load rating10.2kN
PuFatigue load limit0.428kN

Tehnical Drawing

Sealing

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Sealing Drawing

LR-35/72

×

LR-35/72

×

Sealing Type:

Single seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing.

LR-35/72

×