SR EN RU

LEG 205 2F

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

3D view

Technical Specification
dBore diameter25mm
DaCentering diameter70mm
LOverall width115mm
ADistance from the housing flange to the front of the inner ring of the bearing29.5mm
A1Total housing width27mm
A2Housing flange thickness7mm
A3Centering diameter height6mm
JPitch circle diameter90mm
J1Distance between the holes63.6mm
NDiameter of attachment slot 12mm
kgMass0.98kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.335kN

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LEG 205 2F

×

LEG 205 2F

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LEG 205 2F

×