SR EN RU

LEG 204 2F

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

3D view

Technical Specification
dBore diameter20mm
DaCentering diameter62mm
LOverall width100mm
ADistance from the housing flange to the front of the inner ring of the bearing28.3mm
A1Total housing width25.5mm
A2Housing flange thickness7mm
A3Centering diameter height5mm
JPitch circle diameter78mm
J1Distance between the holes55.1mm
NDiameter of attachment slot 12mm
kgMass0.67kg
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.28kN

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LEG 204 2F

×

LEG 204 2F

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LEG 204 2F

×