SR EN RU

LK 210 2F+H 2310

Y-Ball Bearings With Adapter Sleeve

3D view

Technical Specification
dBore diameter50mm
DOutside diameter 90mm
BWidth inner ring 37mm
C Width outer ring 22mm
d1Outer diameter inner ring 62.5mm
EDistance from raceway centre to the hole for lubrication 6.4mm
d2Bore diameter-adapter sleeve45mm
L Width adapter sleeve55mm
WKM nut outside diameter70mm
YKM nut width12mm
CdynDynamic load rating35kN
CoStatic load rating23.2kN
PuFatigue load limit0.695kN
kgMass0.86kg

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LK 210 2F+H 2310

×

LK 210 2F+H 2310

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LK 210 2F+H 2310

×