SR EN RU

LK 206 2F

Y-Ball Bearings With Tapered Bore

3D view

Technical Specification
dBore diameter30mm
DOutside diameter 62mm
BWidth inner ring 28mm
C Width outer ring 18mm
d1Outer diameter inner ring 39.7mm
EDistance from raceway centre to the hole for lubrication 5.1mm
d2Bore diameter-adapter sleeve25mm
CdynDynamic load rating19.5kN
CoStatic load rating11.3kN
PuFatigue load limit0.335kN
kgMass0.22kg

Tehnical Drawing

Sealing

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Sealing Drawing

LK 206 2F

×

LK 206 2F

×

Sealing Type:

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal

LK 206 2F

×