FKL production programme

FKL is primarily orientated towards the production of standard type bearings and bearings for special applications as well.
Competent personnel, high quality raw material, high quality machinery as well as long time experience provide competitive quality of FKL products. Flexibility to customer requests, quality and competitive prices made FKL products present worldwide.

FKL produces following bearing program:

 

INSERT BALL BEARINGS - BEARING UNITS


Their applications is primarily on agriculture machinery, transporters, building machinery etc. They are very suitable for mounting in conditions where it is hard to achieve. In this cases insert bearings - bearing units give real contribution to overcome this obstacles and coaxial aberration +- 2o. This bearings are suitable for exploitation in hard working conditions (dust environment etc.). Depending on environment and working conditions, these bearings are manufactured with single, double and triple sealing and in that way answer hardest working conditions (working temperature up to 80oC and short time up to 120oC). Grease for lubrication is complex lithium - based grease with consistency 2 according to NLGI. Bearings are produced with radial internal clearance C3.

INSERT BALL BEARINGS – BEARING UNITS

 

DEEP GROOVE BALL BEARINGS

FKL produce deep groove ball bearings series 60,62,63,64,622,623 according to DIN 625. It receives radial and axial forces and are suitable for higher number of revolutions. Self - alignment of these bearings is limited. Sealed bearings do not need maintenance and they enable simple construction of beddings.

DEEP GROOVE BALL BEARINGS

 

ANGULAR CONTACT BALL BEARINGS

FKL produce single - row and double - row angular contact ball bearings. Double-row angular contact ball bearings are designed to replace two single angular contact ball bearings in O-arrangement. Its loads are accommodated in single direction, according to a position of filing slots.
Double row bearings are open, non-separable, with filling slots.

ANGULAR CONTACT BALL BEARINGS

 

CYINDRICAL ROLLER BEARINGS

Its application is on places which request higher radial load capacity, axial adaptability due to production inaccuracy and temperature dilatation and where there is no request for transmission of axial loads.
It is produced in standard construction, reinforced E construction and with full row cylinders for the hardest load.

CYINDRICAL ROLLER BEARINGS


 

SINGLE ROW CYLINDRICAL ROLLER BEARINGS

FKL manufacture single row cylindrical roller bearings in accordance with DIN 5412 standard, part 1 and angle rings according to ISO 246 and DIN 5412 part 1. These bearings are separable, therefore easy for mounting and dismounting, particularly where interference fits are required for both rings. Contact line between raceway and rollers is modified, eliminating edge stressing.

 SINGLE ROW CYLINDRICAL ROLLER BEARINGS



SPHERICAL ROLLER BEARINGS

Manufactured as single and double row bearings. They are very suitable for mounting into places which request high radial load and accommodation evasion in alignment.
Their usage is justified for addition radial stroke places. 2 constructions are possible: with cylindrical and conical bore. FKL produce also spherical roller bearings with reinforced E construction with higher load capacity than main type.

SPHERICAL ROLLER BEARINGS

 

NEEDLE ROLLER BEARINGS

Their application is for places which request high radial load with low mounting height.
Needle bearings are mounted with or without inner ring inside and with full - row needles which increase load capacity.

NEEDLE ROLLER BEARINGS

 

PLAIN BEARINGS

Requests for high static load capacity and slow oscillations are resolved by plain bearings mounting. This bearing requires minimal maintenance.

PLAIN BEARINGS

 

TRACK RUNNER BEARINGS

Track runner bearings are rolling bearings with a particularly thick-walled outer ring that enables its direct running in various guide forms. It can be easily attached to appropriate machine components.

TRACK RUNNER BEARINGS – CAM FOLLOWERS


ADAPTER SLEEVES

Adapter sleeves are the most commonly used components for locating bearings with a tapered bore into a cylindrical shafts seating. They are easily to mount, and require no additional location on the shafts. FKL adapter sleeves are produced from high-quality steel, have a very precise form, and an excellent price/performance factors ratio. FKL adapter sleeves are made as complete product, with lock nut and locking washer.

ADAPTER SLEEVES

Apart from production of standard designs of bearings, FKL meets clients requests also for the production of special bearings, such as clutch bearings, transporters, bearings for agriculture machinery, tool machines etc. Long term experience and skilled personnel create good knowledge base which is available to our clients in any moment.


Top